Sep 25, 2025Leave a message

What are the machinability ratings of different non - ferrous metal parts?

As a supplier of non-ferrous metal parts, I've had the privilege of working with a wide range of materials and understanding their unique characteristics. One of the most crucial aspects in the manufacturing and usage of non-ferrous metal parts is their machinability. Machinability ratings help us predict how easily a material can be cut, shaped, and finished during the machining process. In this blog, I'll delve into the machinability ratings of different non-ferrous metal parts, providing insights that can be valuable for both manufacturers and end-users.

Understanding Machinability Ratings

Machinability is a complex concept that encompasses several factors, including the material's hardness, ductility, thermal conductivity, and chip formation. A high machinability rating means that the material can be machined quickly, with good surface finish, and with minimal tool wear. Conversely, a low machinability rating indicates that the material is more difficult to machine, requiring specialized tools and techniques.

The most common method for rating machinability is by comparing the material to a standard reference material, usually B1112 free-cutting steel, which is assigned a machinability rating of 100%. Materials with higher ratings are easier to machine than the reference material, while those with lower ratings are more difficult.

Aluminum and Its Alloys

Aluminum is one of the most widely used non-ferrous metals due to its excellent combination of low density, high strength-to-weight ratio, and good corrosion resistance. Most aluminum alloys have high machinability ratings, typically ranging from 60% to 90%.

Pure aluminum (1xxx series) has a relatively low hardness and is very ductile, which makes it easy to machine. However, it can also cause problems with chip formation, as the chips tend to be long and stringy. To improve machinability, small amounts of alloying elements such as silicon, copper, and magnesium are added to form aluminum alloys.

The 6xxx series of aluminum alloys, which are commonly used in structural applications, have a machinability rating of around 70% to 80%. These alloys contain magnesium and silicon as the main alloying elements, which provide good strength and formability. They also produce short, broken chips during machining, which is beneficial for chip evacuation and tool life.

The 2xxx series of aluminum alloys, which are known for their high strength, have a slightly lower machinability rating of around 60% to 70%. These alloys contain copper as the main alloying element, which increases their strength but also makes them more difficult to machine. Specialized cutting tools and machining parameters may be required to achieve good results when machining 2xxx series alloys.

BR-45 Degree Positioning Fixture-JJ-01

Copper and Its Alloys

Copper is another important non-ferrous metal with excellent electrical and thermal conductivity. It is also relatively easy to machine, with a machinability rating of around 80% to 90%.

Pure copper is very ductile and has a low hardness, which makes it easy to cut. However, it can also cause problems with tool wear, as the copper chips tend to adhere to the cutting tool. To improve machinability, small amounts of alloying elements such as zinc, tin, and lead are added to form copper alloys.

Brass, which is an alloy of copper and zinc, has a high machinability rating of around 80% to 90%. The addition of zinc to copper improves its strength and hardness, while also reducing the tendency for the chips to adhere to the cutting tool. Brass is commonly used in applications such as plumbing fittings, electrical connectors, and decorative items.

Bronze, which is an alloy of copper and tin, has a slightly lower machinability rating of around 60% to 80%. The addition of tin to copper improves its corrosion resistance and wear resistance, but also makes it more difficult to machine. Specialized cutting tools and machining parameters may be required to achieve good results when machining bronze alloys.

Titanium and Its Alloys

Titanium is a lightweight, high-strength metal with excellent corrosion resistance. However, it has a relatively low machinability rating, typically ranging from 20% to 40%.

The main reason for the low machinability of titanium is its high chemical reactivity and low thermal conductivity. During machining, the high cutting temperatures generated can cause the titanium to react with the cutting tool, resulting in rapid tool wear. In addition, the low thermal conductivity of titanium means that the heat generated during machining is not dissipated quickly, which can lead to thermal damage to the workpiece and the cutting tool.

To improve the machinability of titanium, specialized cutting tools made from materials such as carbide or ceramic are required. These tools have a high hardness and wear resistance, and can withstand the high cutting temperatures generated during machining. In addition, low cutting speeds and high feed rates are typically used to reduce the cutting forces and heat generation.

Magnesium and Its Alloys

Magnesium is the lightest structural metal, with a density of only two-thirds that of aluminum. It has a high machinability rating, typically ranging from 60% to 80%.

The main advantage of magnesium in terms of machinability is its low density and high thermal conductivity. These properties allow for high cutting speeds and low cutting forces, which result in fast machining times and low tool wear. In addition, magnesium alloys produce short, broken chips during machining, which is beneficial for chip evacuation and tool life.

However, magnesium is also highly flammable, and special precautions must be taken during machining to prevent fires and explosions. These precautions include using proper ventilation, avoiding the accumulation of magnesium chips, and using cutting fluids that are specifically designed for magnesium machining.

Nickel and Its Alloys

Nickel is a versatile metal with excellent corrosion resistance, high strength, and good ductility. It has a relatively low machinability rating, typically ranging from 20% to 40%.

The main reason for the low machinability of nickel is its high work hardening rate and low thermal conductivity. During machining, the high cutting forces and temperatures generated can cause the nickel to work harden, which makes it more difficult to cut. In addition, the low thermal conductivity of nickel means that the heat generated during machining is not dissipated quickly, which can lead to thermal damage to the workpiece and the cutting tool.

To improve the machinability of nickel, specialized cutting tools made from materials such as carbide or ceramic are required. These tools have a high hardness and wear resistance, and can withstand the high cutting temperatures generated during machining. In addition, low cutting speeds and high feed rates are typically used to reduce the cutting forces and heat generation.

Choosing the Right Non-Ferrous Metal for Your Application

When choosing a non-ferrous metal for your application, it's important to consider not only the machinability rating but also other factors such as the material's mechanical properties, corrosion resistance, and cost. In some cases, a material with a lower machinability rating may be preferred if it offers better performance in other areas.

For example, if you need a material with high strength and corrosion resistance, titanium or nickel alloys may be a better choice, even though they have a lower machinability rating. On the other hand, if you need a material that can be easily machined and is relatively inexpensive, aluminum or copper alloys may be a better option.

At our company, we offer a wide range of non-ferrous metal parts, including BR-45 Degree Positioning Fixture-JJ-01. Our experienced team can help you choose the right material and machining process for your specific application, ensuring that you get the best possible results.

Conclusion

In conclusion, the machinability ratings of different non-ferrous metal parts vary widely depending on the material's composition, hardness, ductility, and thermal conductivity. Understanding these ratings can help you choose the right material and machining process for your application, ensuring that you get the best possible results in terms of quality, cost, and efficiency.

If you're interested in learning more about our non-ferrous metal parts or have any questions about machinability, please don't hesitate to contact us. We'd be happy to discuss your specific needs and provide you with a customized solution.

References

  1. ASM Handbook, Volume 16: Machining, ASM International, 1989.
  2. Metals Handbook, Desk Edition, Second Edition, ASM International, 1998.
  3. Machining Data Handbook, Third Edition, Metcut Research Associates, Inc., 1980.

Send Inquiry